Product Overview

 

Industrial-grade packaging adhesives formulated for automated cartoning, case sealing, and flexible packaging conversion. Manufactured from pure synthetic polymers and select tackifying resins, these products deliver immediate green strength and robust bond integrity across challenging substrates, including high-gloss UV-coated, PE-coated, and recycled corrugated boards.
Engineered for direct integration with standard high-speed dispensing systems (Nordson, Robatech, Meler), our adhesive portfolio minimizes thermal degradation, prevents nozzle carbonization, and maintains stable viscosity under continuous operating temperatures between 120C and 180C.

 
 
Key Features

Low Thermal Degradation & Carbonization

Controlled molecular weight distribution reduces char formation in hot melt tanks, extending applicator module and nozzle lifespan.


Rapid Setting Kinetics

Short open times and high initial tack enable immediate fiber tear on high-speed lines exceeding 60 meters per minute.

Substrate Versatility

Strong adhesion to recycled linerboards, wax-treated corrugated surfaces, and aqueous or UV-varnished folding cartons.

Broad Thermal Operating Window

Maintains peel and shear strength under deep-freeze storage conditions (-20C) and tropical transit heat environments (up to 70C).

Low Volatile Organic Compounds (VOCs)

Odor-controlled formulations meeting strict workplace safety and indoor air quality standards.

 

Technical Specifications

 

Technical Parameter

Test Method

Hot Melt Adhesive (HMA-EVA Series)

PUR Structural Adhesive (Polyurethane)

Water-Based Emulsion (PVA/EVA)

Base Polymer

FTIR / ASTM D2356

EVA / Synthetic Resin

Moisture-Curing Polyurethane

Polyvinyl Acetate / Copolymer

Appearance

Visual

Amber / White Prills / Pillows

White / Yellow Solid Block

Milky White Liquid

Viscosity @ 160C / 25C

ASTM D3236 / Brookfield

1,200 – 1,800 mPa*s (@ 160C)

8,000 – 12,000 mPa*s (@ 120C)

2,500 – 5,000 mPa*s (@ 25C)

Softening Point (R&B)

ASTM E28

85C – 105C

N/A (Reactive Cure)

N/A

Open Time

ASTM D4498

Short (1 – 3 seconds)

Medium (3 – 6 seconds)

Adjustable (5 – 15 seconds)

Setting Time

ASTM D4498

Fast (0.8 – 1.5 seconds)

Fast (Crosslinking over 24h)

Moderate (dependent on paper absorption)

Service Temperature

Internal Standard

-20C to +65C

-40C to +120C

-10C to +50C

FDA Compliance

21 CFR 175.105

Compliant (Indirect Food Contact)

Compliant

Compliant

 

Applications

Corrugated Case & Carton Sealing

Automated top and bottom sealing of regular slotted containers (RSC) in food, beverage, and appliance manufacturing lines.

Folding Carton & Luxury Box Gluing

Side-seam bonding for high-end cosmetic boxes and pharmaceutical packaging featuring laminated or varnished surfaces.

Tray & Box Forming

High-speed erectors requiring quick-set adhesives to withstand immediate stack pressure without spring-back.

Straw Attachment & Multi-Pack Bundling

Tetra Pak straw bonding and promotional multipack bundling for retail beverage containers.

 

 

Customization & OEM Solutions

Manufacturing operations require adhesive rheology tailored to specific machinery and substrate pairings. We formulate custom adhesive solutions based on operational parameters:


Viscosity Tuning: Adjustment of melt viscosity to match specific dispensing pump rates and operating temperatures (120C–190C).


Open & Setting Time Optimization: Tailoring open time for slow-speed hand-pack operations or high-speed robotic dispensing cells.


Color & Odor Customization: Clear, white, or amber color grading; scent-neutral options for food and pharmaceutical packaging.


Private Labeling & Packaging: Customized fiber drums, carton boxes, or aluminum foil bags featuring client logos and batch tracking codes.

Clear Polypropylene Tape suppliers

 

Quality Control
 

Every production lot undergoes rigorous laboratory verification prior to warehouse release to ensure batch-to-batch consistency:

Rheological Testing

Brookfield viscometer analysis to verify flow behavior at application temperatures.

Thermal Stability Test

72-hour heat aging test at 180C to monitor color stability, skinning, and viscosity drift.

Bond Strength & Shear Testing

Universal tensile testing machine (Instron) to measure fiber tear percentage and peel/shear resistance on client-supplied substrates.

Traceability

Full lot number coding stamped on packaging, backed by retained samples stored for 12 months.

 

Packaging & Shipping

 

 

Hot Melt Adhesives (Prills / Pillows / Blocks)

20 kg / 25 kg multi-layer kraft paper bags with inner PE release liners.
500 kg gaylord boxes / corrugated bulk containers for automated feed systems.

 

Water-Based Adhesives

50 kg plastic drums, 200 kg steel-plastic composite drums, or 1,000 kg IBC totes.

 

Logistics & Storage

Palletized, shrink-wrapped, and moisture-protected. Store in dry, ventilated environments below 35C, away from direct sunlight, to prevent agglomeration.

 

 

 

FAQ

 

 

Q: How do I prevent adhesive stringing on high-speed dispensing nozzles?

A: Stringing is typically caused by insufficient application temperature or excessive melt viscosity. Verify that your tank and hose temperatures match the recommended operating window (usually 150C–170C for EVA hot melts). If the issue persists, switch to an adhesive grade with a sharper molecular weight distribution and lower melt index. Request our technical data sheet (TDS) for precise thermal settings.

Q: Are your packaging adhesives compliant with FDA regulations for indirect food contact?

A: Yes. Our standard EVA and polyolefin hot melt formulations comply with FDA 21 CFR 175.105 (adhesives for indirect food contact). Compliance documentation and migration test reports can be provided for audit purposes upon request.

Q: What is the shelf life of your hot melt and water-based adhesives?

A: Solid hot melt adhesives have a shelf life of 24 months when stored in original unopened packaging in a cool, dry place (under 35C). Water-based emulsion adhesives have a shelf life of 6 months and must be protected from freezing temperatures.

Q: Can we test adhesive samples on our production line before placing a bulk order?

A: Yes. We provide free sample quantities (1 kg to 5 kg) for laboratory evaluation and industrial line trials. Please supply your substrate material specs and current machine type so our engineering team can select the precise grade for testing.

Q: What is your standard lead time for OEM custom adhesive formulations?

A: Laboratory formulation and sample prototyping typically require 5 to 7 business days. Full-scale production and quality verification for custom batch orders take 12 to 15 business days from technical sign-off and PO confirmation.

 

modular-1
Request a Quote

Provide your packaging specifications, machine type, and substrate requirements to receive a technical proposal, TDS, and sample evaluation kit within 24 hours.
Required Project Details for Quotation
Substrate material (e.g., recycled corrugated board, UV-coated duplex paper)
Application method (slot nozzle, roller, spray, or wheel applicator)
Operating line speed or open time requirement
Estimated annual consumption volume (kg / tons)

As one of the most professional packaging adhesives manufacturers in China, we're featured by quality products and good price. Please rest assured to buy advanced packaging adhesives made in China here from our factory. Contact us for pricelist.

Shopping Bags