Plastic Air Cushion
video
Plastic Air Cushion

Plastic Air Cushion

We have 100 air column production lines and more than 50 honeycomb film lines. Plastic air cushion is mainly made on the air column lines. Our equipment is fully automatic. Raw material goes in. Finished product comes out. There is not much manual work. This gives two benefits.

Description

What Our Equipment Can Do

 

We have 100 air column production lines and more than 50 honeycomb film lines. Plastic air cushion is mainly made on the air column lines. Our equipment is fully automatic. Raw material goes in. Finished product comes out. There is not much manual work. This gives two benefits. First, the product is consistent. It does not vary in thickness from day to day. Second, the capacity is high. We make 1,000 tons per month. If you need it urgently, our lines can run 24 hours. We also have our own mold workshop. If you need a special size, we can make the mold ourselves. We do not need to wait for an outside supplier. We have 2 invention patents and 17 utility model patents. One of them is about air cushion molds. So custom sizes are not hard for us. Just tell us what you need.

422cd15c-6da1-465a-9a33-67e2c095b43d

 

Technical Parameters

 

Plastic air cushion becomes small air cushions after inflation. You can use it as void fill or as a cushion pad. The table below gives five key specifications from different angles.

 

Parameter

Value

Thickness (heavy duty)

0.08 to 0.12 mm (custom up to 0.15 mm)

Custom size range

min 10×10 cm, max 100×150 cm

Heat seal strength

1.5 N/15 mm or more

Density

0.91 to 0.93 g/cm³

Online leak test

100% inspection

 

-5

How We Ensure You Get Good Products

 

We have a complete factory inspection process. Before we ship each batch, we do several tests. First, we check appearance and size. The sample rate is at least 5%. Second, we do function tests. We take regular samples for burst pressure tests and drop tests. Burst pressure must be at least 0.2 MPa. For the drop test, we drop the product from 1 meter onto a concrete floor. The product must not break. Third, we check air tightness. We inflate the product and let it sit for 24 hours. Then we see if it leaks. All test data is recorded under the batch number. If you find a problem after receiving the goods, contact our after-sales team. We reply within 2 hours and give a solution within 48 hours. For quality problems, we replace the goods without question. We give a one-year warranty. You can use our plastic air cushion with confidence.

 

Hot Tags: plastic air cushion, China plastic air cushion manufacturers, factory, Air Pillow Material, packaging adhesives, Packing Air Cushions, Plastic Air Cushion, Air Cushion Bubble Wrap, inflatable packaging

You Might Also Like

Shopping Bags